Lessons › Data centre networking
Cables, fibre and optics without the confusion
▶ Start the interactive lesson
A pallet arrives: 40 servers, boxes of cables, and a bag of tiny metal modules called "optics". The build sheet says: "Connect each server's 100G port to leaf switch, port as per sheet. Use SR4 optics and MPO trunk." You understood about half of that sentence. Sam laughs: "Cabling is half the job…
Copper or fibre?
Copper (the familiar Ethernet cable, or thick "DAC" cables) is cheap and simple, but only works over short distances: a few metres for high speeds.
Optics: the plug-in translators
Switches and servers often have empty ports called cages. You plug an optic (transceiver) into the cage. It turns electrical signals into light, and back.
Fibre types and connectors
Multimode fibre (often aqua or purple jackets) is for short runs. Single-mode fibre (yellow jacket) is for long runs.
Labels and documentation
Every cable gets a label at both ends saying where it goes: for example B14-U22-P1 ⇄ LEAF3-E1/12.
Key points
- Copper/DAC for short runs inside a rack, fibre between racks and further.
- Optics plug into ports and convert electricity ⇄ light. Both ends must match (SR with SR, LR with LR).
- Multimode for short reach, single-mode (yellow) for long reach. LC for single links, MPO for many fibres.
- Label both ends, follow the cabling sheet, check link lights, keep fibre clean.
Words you'll learn
DAC (direct attach copper) · AOC (active optical cable) · Optic / transceiver · SFP / SFP28 · QSFP / QSFP-DD · Multimode (MMF) · Single-mode (SMF) · LC · MPO / MTP · Cabling sheet / patch schedule